# Philips DCC600 Lubrication

**URL:** <https://forum.dccmuseum.com/t/philips-dcc600-lubrication/1634>\
**Category:** Recorders, Players, etc.\
**Created:** [May 4, 2025, 10:25am UTC](https://forum.dccmuseum.com/t/philips-dcc600-lubrication/1634 "2025-05-04T10:25:04Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Byteman](https://forum.dccmuseum.com/letter_avatar_proxy/v4/letter/b/9de053/32.png) [@Byteman](https://forum.dccmuseum.com/u/Byteman)\
**Post date:** [May 4, 2025, 10:25am UTC](https://forum.dccmuseum.com/t/philips-dcc600-lubrication/1634/1 "2025-05-04T10:25:04Z")

</div>

Hi all,

I have a question about lubricating the rotating parts in the DCC600 mechanism.

It seems that two different types of grease were used: Molykote PG-65 for sliding components (such as the tape drawer and head carrier), and a different type of grease or oil for rotating parts.

Could anyone advise what kind of oil or grease is recommended for the following:

- Take-up spindles (especially the area where the spring slips on the axle)
- Capstan bottom bearings
- The spider gear (if lubrication is even required there)

Any advice would be greatly appreciated.

Best regards,  
Alexander

---

<div class="post-metadata">

**Author:** ![BijanK](https://forum.dccmuseum.com/user_avatar/forum.dccmuseum.com/bijank/32/1872_2.png) [@BijanK](https://forum.dccmuseum.com/u/BijanK)\
**Post date:** [May 26, 2025, 12:40pm UTC](https://forum.dccmuseum.com/t/philips-dcc600-lubrication/1634/2 "2025-05-26T12:40:16Z")

</div>

Can’t give a learned opinion here, but I’d guess a light (watch) oil should be fine for the capstans and white grease/Molykote or Tamiya Boron-Ceramic grease for any gears. That’s what I usually use.
