# DCC730 head beyond repair?

**URL:** https://forum.dccmuseum.com/t/dcc730-head-beyond-repair/1019
**Category:** Recorders, Players, etc.
**Created:** [June 11, 2021, 4:54pm UTC](https://forum.dccmuseum.com/t/dcc730-head-beyond-repair/1019 "2021-06-11T16:54:57Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![saturn5](https://forum.dccmuseum.com/user_avatar/forum.dccmuseum.com/saturn5/32/840_2.png) [@saturn5](https://forum.dccmuseum.com/u/saturn5)
#### Post date: [June 11, 2021, 4:54pm UTC](https://forum.dccmuseum.com/t/dcc730-head-beyond-repair/1019/1 "2021-06-11T16:54:57Z")

</div>

Hi all, going through my spares I have found this head in a machine that I swear had been pulled out of a landfill site. The ribbon has completely torn at the end where it connects to the read/write board.

 ![IMG_20210610_170850654_HDR](https://forum.dccmuseum.com/uploads/default/original/2X/b/b60e49861788c7615fadda9809e70f1b720233e1.jpeg).  
As you can see it is a relatively clean break and there are contact pads(?) on the ribbon that are about double the width of the traces. Has anyone been in this situation previously and tried plugging a cable, damaged like this, into connector 1800 on the R/W board and had any success. I’m thinking that the pads look a little too wide and will short with adjacent pins?  
 ![IMG_20210610_170945757_HDR](https://forum.dccmuseum.com/uploads/default/original/2X/9/9f93022a76fba2bb3de21a1e141d74b3ed53f8d4.jpeg)  
When I have a little more time I will test with a multimeter but thought I would ask here first.  
Thanks in advance. 👍

---

<div class="post-metadata">

### Author: ![drdcc](https://forum.dccmuseum.com/user_avatar/forum.dccmuseum.com/drdcc/32/9_2.png) [@drdcc](https://forum.dccmuseum.com/u/drdcc)
#### Post date: [June 11, 2021, 5:14pm UTC](https://forum.dccmuseum.com/t/dcc730-head-beyond-repair/1019/2 "2021-06-11T17:14:18Z")

</div>

That seems not impossible, but hard at least. Never done this at the DCC Museum.

---

<div class="post-metadata">

### Author: ![saturn5](https://forum.dccmuseum.com/user_avatar/forum.dccmuseum.com/saturn5/32/840_2.png) [@saturn5](https://forum.dccmuseum.com/u/saturn5)
#### Post date: [June 11, 2021, 5:16pm UTC](https://forum.dccmuseum.com/t/dcc730-head-beyond-repair/1019/3 "2021-06-11T17:16:21Z")

</div>

I’m now wondering if I can somehow scratch the pads down in width or maybe even mask the tracks and apply a varnish to reduce the contact area?
