# DCC 730/951 R/W board capacitors, beware

**URL:** <https://forum.dccmuseum.com/t/dcc-730-951-r-w-board-capacitors-beware/1711>\
**Category:** Recorders, Players, etc.\
**Created:** [January 3, 2026, 4:42am UTC](https://forum.dccmuseum.com/t/dcc-730-951-r-w-board-capacitors-beware/1711 "2026-01-03T04:42:31Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![whaka](https://forum.dccmuseum.com/letter_avatar_proxy/v4/letter/w/df788c/32.png) [@whaka](https://forum.dccmuseum.com/u/whaka)\
**Post date:** [January 3, 2026, 4:42am UTC](https://forum.dccmuseum.com/t/dcc-730-951-r-w-board-capacitors-beware/1711/1 "2026-01-03T04:42:31Z")

</div>

Hello,  
Just to say (and maybe confirm?) than our 730 and 951 can start to suffer from bad capacitors on the R/W board. (keep in mind this board run hot and heat cycles is a thing for smd capacitors)

i recently bring back with me one of my 730 i didn’t used since 2017 or 2018.  
was working fine when i stocked it in a good place.  
but before powering it blindely, i decided to take a look inside… just in case… and yes, i was right to do so.

here the result : [https://youtu.be/MDlmdsseuSY?si=\_06dTH1Kl8aYretP](https://youtu.be/MDlmdsseuSY?si=_06dTH1Kl8aYretP)  
this video was an answer for MrBetaByte, but i decided to share here too.  
i think it’s always better to warn against this as it’s going to show more and more i guess…

at the time i write, i cleaned the board and replaced capacitors with smd tantalum, all is perfectly fine.  
so don’t waste time waiting, REPLACE.

picture after work :

 ![IMG_20260103_063407](https://forum.dccmuseum.com/uploads/default/original/2X/0/0e6e175d9a4bf06eae6f150d78183ef1d3caeb96.jpeg)

cheers 🙂

---

<div class="post-metadata">

**Author:** ![Fretlessfender](https://forum.dccmuseum.com/user_avatar/forum.dccmuseum.com/fretlessfender/32/915_2.png) [@Fretlessfender](https://forum.dccmuseum.com/u/Fretlessfender)\
**Post date:** [February 21, 2026, 5:56pm UTC](https://forum.dccmuseum.com/t/dcc-730-951-r-w-board-capacitors-beware/1711/2 "2026-02-21T17:56:29Z")

</div>

I have a 951 that I keep as a spare… I will have a good look, if wrong I will replace them…

I don’t know about those tantilum caps though…

---

<div class="post-metadata">

**Author:** ![chartz](https://forum.dccmuseum.com/letter_avatar_proxy/v4/letter/c/aca169/32.png) [@chartz](https://forum.dccmuseum.com/u/chartz)\
**Post date:** [August 4, 2026, 1:27pm UTC](https://forum.dccmuseum.com/t/dcc-730-951-r-w-board-capacitors-beware/1711/3 "2026-08-04T13:27:55Z")

</div>

Hi,

Are you located in France by any chance?

It would be nice if you could do my PCBs like yours! I am terribly bad with SM components.

Bonne journée

Jacques

---

<div class="post-metadata">

**Author:** ![bagpuss22](https://forum.dccmuseum.com/user_avatar/forum.dccmuseum.com/bagpuss22/32/57_2.png) [@bagpuss22](https://forum.dccmuseum.com/u/bagpuss22)\
**Post date:** [October 8, 2026, 9:30pm UTC](https://forum.dccmuseum.com/t/dcc-730-951-r-w-board-capacitors-beware/1711/4 "2026-10-08T21:30:01Z")

</div>

My 951 is currently working well BUT might take a look at these caps. Just replaced the caps on my RS-DC8 with Wurth polymer ones that will not leak so may do the same with my 951…
